Last updated: November 2026
Quick answer: EV high voltage safety training teaches technicians to recognise high-voltage (HV) components, choose and check insulated PPE, isolate the HV system using the manufacturer’s procedure, and confirm residual voltage is safe before work starts. Any technician who services hybrids or EVs should be trained before touching orange cables or battery packs.
More hybrids and electric vehicles are coming into Singapore workshops for routine servicing, aircon work, tyres and accident repair, often handled by technicians trained on petrol and diesel cars. EV high voltage safety training closes that skills gap by teaching a repeatable, documented way to work on vehicles with battery systems running at several hundred volts.
In this guide, we at K-Tech Auto Solution explain what HV safety training covers, why untrained technicians are at risk, and how workshops can build safe EV capability step by step.
What is EV high voltage safety training?
EV high voltage safety training is structured instruction that teaches technicians how to work safely on vehicles with HV electrical systems, such as hybrids, plug-in hybrids and battery-electric cars. It covers hazard recognition, personal protective equipment (PPE), isolation (de-energising) procedures, testing for residual voltage and emergency response.
The UK’s Institute of the Motor Industry (IMI) publishes a National Occupational Standard for this work, “Isolate and re-energise high voltage systems in an electric vehicle”. It expects a competent technician to, among other things:
- use vehicle information to identify potential hazards and carry out a dynamic risk assessment;
- identify HV components and cable routes;
- tell everyone relevant that HV work is under way and make the work area safe;
- select and use the correct PPE;
- follow the manufacturer’s procedure to isolate and re-energise the HV system;
- prepare, check and use test equipment, then confirm residual voltage is within the manufacturer’s specification;
- follow emergency procedures and keep accurate records.
Why are untrained technicians at risk on EVs and hybrids?
Untrained technicians are at risk because HV systems can cause serious electric shock, arc flash and burns, and the hazards are not always obvious. A car that looks switched off may still have energised components, and a quiet EV can move without the engine noise people expect.
Common risk situations we hear about from workshops include:
- Treating an orange cable like any other wiring harness. Orange cabling marks HV circuits. Disconnecting or cutting one without isolation is dangerous.
- Using standard gloves and tools. Ordinary mechanic gloves and non-insulated tools give no protection against HV.
- Skipping the isolation check. Pulling a service disconnect is not the same as confirming the system is safe. The IMI standard calls for testing that residual voltage is within specification after isolation.
- Working on a damaged vehicle. Accident-damaged or flood-affected EVs may have compromised insulation or battery damage, which raises the risk further.
There is also a business risk. A workshop that turns away hybrids and EVs loses that work to competitors, and one that takes them on without training exposes its staff and its reputation.
What levels of EV training are there?
The IMI EV framework is one widely used reference for how HV skills build up. According to this summary of the IMI EV levels, the courses are split as follows:
| Level | Focus | Typical learner |
|---|---|---|
| Level 1 – Vehicle Awareness | Recognising EV hazards, e.g. quiet vehicles | Valeters, sales staff, managers, anyone working near EVs |
| Level 2 – Routine Maintenance | Safely isolating HV systems and doing routine maintenance around them | Qualified or time-served technicians |
| Level 2 – Hazard Management | Working safely around EVs at incidents | Breakdown, recovery and emergency responders |
| Level 3 – Repair and Replacement | Repairing or replacing HV components with the system switched off | Technicians doing HV component work |
| Level 4 – Diagnosis, Testing and Repair | Working on HV systems while energised | Technicians who have completed Level 3 |
Not every technician needs Level 4; match the level to the work your bay actually does.
What does a safe HV workflow look like?
A safe HV workflow follows the same core steps every time, based on the manufacturer’s procedure for that vehicle:
- Identify the vehicle and system. Confirm whether it is a hybrid, plug-in hybrid or full EV, and look up the manufacturer’s HV information.
- Assess the risk. Check for damage, fluid leaks, heat or unusual smells around the battery and HV components.
- Secure the area. Mark the bay, use barriers or signs, and tell colleagues HV work is under way.
- Check your PPE. Inspect insulated gloves and other PPE before every use, as the IMI standard expects.
- Isolate the HV system. Follow the manufacturer’s isolation procedure exactly.
- Test before touch. Prepare and check your test equipment, then confirm residual voltage is within the manufacturer’s specification.
- Do the work and record it. Keep records of isolation and re-energisation.
- Re-energise and verify. Re-energise per the manufacturer’s procedure and confirm the system works correctly before the car goes back to the customer.
When should a workshop invest in HV training?
A workshop should invest in HV training before it accepts its first hybrid or EV job that goes beyond a wash or tyre rotation. Clear signs it is time to act:
- hybrids and EVs are already arriving for servicing, aircon or tyre work;
- your technicians have asked how to handle orange cables or battery warnings;
- you plan to buy EV diagnostic equipment or a battery lift;
- you are taking on fleet contracts that include electric vans or cars.
How K-Tech helps
K-Tech Auto Solution supports workshops across Singapore and Malaysia with training, equipment, technical support and setup advice for EV and hybrid work. We supply equipment and training; we do not repair vehicles. Car owners needing repair can visit Motoserv.
- Training: The K-Tech Technical Training Academy runs training aligned with IMI standards. Our Intermediate Hybrid & EV Technology Training Programme, run with Temasek Polytechnic, is a 2-day course (8 hours of practical and theory plus 8 hours of e-learning). It covers HV safety, PPE and risk management, battery pack assembly and disassembly, EV aircon maintenance, battery testing, dynamic performance and emissions. Participants receive a certificate jointly issued by K-Tech and Temasek Polytechnic, and eligible Singapore Citizens and PRs can use SkillsFuture Credit.
- Equipment: Once your team is trained, the right tools matter. We supply the Autel MaxiSYS MS909EV and EV Diagnostics Upgrade Kit for HV battery analysis, and the Thinkcar EVP501 mobile EV battery lift (1,500 kg) for battery removal. See our full equipment range.
- Support and setup: We provide technical support and software updates for the equipment we supply, and advise on setting up EV-ready bays.
Visit us: K-Tech Auto Solution, 60 Jalan Lam Huat #05-55, Carros Centre, Singapore 737869. Open Monday to Friday, 10am to 5pm.
Key takeaways
- EV high voltage safety training teaches hazard recognition, PPE, isolation and residual-voltage testing.
- Untrained technicians face shock, arc-flash and burn risks, especially on damaged vehicles.
- The IMI framework runs from Level 1 awareness to Level 4 live-system work; match the level to the job.
- A written, repeatable HV workflow and proper records protect your staff and your business.
- K-Tech’s 2-day Intermediate Hybrid & EV course with Temasek Polytechnic is SkillsFuture Credit eligible.
Frequently asked questions
Who needs EV high voltage safety training? Any technician who services, repairs or diagnoses hybrids or EVs should be trained before working near HV components. Staff who only move or handle EVs, such as valeters or service advisers, benefit from awareness-level training.
Is pulling the service disconnect enough to make an EV safe? No. The service disconnect is one step in the manufacturer’s isolation procedure. Technicians must then test with checked equipment to confirm residual voltage is within the manufacturer’s specification before starting work.
What PPE is needed for HV work on EVs? The exact PPE depends on the manufacturer’s procedure and the task, but insulated gloves rated for the system voltage are central. PPE must be inspected before every use, and training teaches how to select, check and use it correctly.
Can K-Tech’s EV course be paid for with SkillsFuture Credit? Yes. K-Tech’s Intermediate Hybrid & EV Technology Training Programme with Temasek Polytechnic is SkillsFuture Credit eligible for eligible Singapore Citizens and PRs. Contact K-Tech on 6264 3832 for current fees and intake dates.
Does K-Tech repair electric vehicles? No. K-Tech Auto Solution supplies workshop equipment and runs technical training and support for the trade. Car owners who need EV or hybrid repairs can contact the Motoserv workshop network at motoserv.sg.
Train your team before the next EV rolls in
Ready to make your workshop EV-safe? Call or WhatsApp 6264 3832, email sales@k-tech.sg, or send an enquiry through our contact page. We’ll help you plan training and equipment for safe hybrid and EV work.