How to Start a Car Workshop in Singapore: Equipment Guide

Last updated: November 2026

Quick answer: To start a car workshop in Singapore, confirm the unit is approved for industrial use, check which licences and notifications apply on GoBusiness, then equip the bays in stages: lift and hand tools, a professional diagnostic scan tool, aircon recovery, battery and TPMS testing. Train technicians early, especially for hybrids and EVs.

Planning how to start a car workshop in Singapore usually begins with a unit and a lift, but the decisions that shape your first two years are the ones made before renovation: whether the premises are approved for the work, which equipment earns its keep from day one, and whether your technicians can handle the hybrids and EVs already coming through the door. At K-Tech Auto Solution, we have supplied workshop equipment, training and technical support to workshops in Singapore and Malaysia since 2004, and this guide sets out the checklist we walk new workshop owners through.

This is a practical guide, not legal advice. Regulations change, so always confirm requirements with the relevant agency before you commit.

What should you check before signing a lease for a car workshop?

Check the approved use of the unit first, because a workshop needs premises approved for industrial-related use. URA advises business owners not to commit to a tenancy or renovation works before getting a decision on the use of the premises, and its “Enquire on the Approved Use of Premises” service lets you check a specific unit. If the unit is on JTC land, landowner consent from JTC is also needed.

Before you sign, also check:

  • Landlord and building rules: many flatted factories restrict lifts, floor loading, noise, fumes and operating hours.
  • Licences and notifications: search GoBusiness Licensing for your planned activities. Depending on what you store and do on site, items such as an NEA hazardous substances licence may apply, and MOM’s factory rules cover vehicle repair carried out as part of a commercial undertaking.
  • Power supply: aircon machines, compressors, lifts and EV work all add load, so confirm the available supply with your M&E contractor.
  • Bay layout: plan vehicle flow, a clean area for diagnostics and electrical work, and a separate zone for refrigerant and fluids.

What equipment does a new car workshop in Singapore need?

A new workshop needs core mechanical equipment first, then diagnostic and service equipment that matches the cars in your area and the jobs you want to sell. The table below is the staged checklist we use when planning a workshop setup with customers.

StageEquipmentWhy it matters
1. CoreVehicle lifts, hand and power tools, compressor, fluid handling, safety equipmentBasic servicing, brakes and suspension work
2. DiagnosticsProfessional scan tool, e.g. Autel MaxiSYS MS909S2 or MaxiSYS UltraFault codes, live data, coding, service resets and module work on modern cars
3. AirconRefrigerant recovery/recharge machine, e.g. K10HV; flushing machine K11HV+Aircon is a high-demand job in Singapore’s climate
4. Electrical and tyresAutel MaxiBAS BT608 battery tester, Autel TS508WF TPMS tool, TBE200 tread and brake scannerFast checks that turn into documented, justified repairs
5. GrowthADAS calibration, EV diagnostics (MS909EV or EV Diagnostics Upgrade Kit), smoke leak detector (MistPro K13/K15), Thinkcar EVP501 battery liftHigher-value work on newer, hybrid and electric vehicles

You do not need everything on day one. Most new workshops start with stages 1 to 3 and add stages 4 and 5 as their customer base and technician skills grow.

Which diagnostic tool should a new workshop buy first?

Buy a professional, bidirectional scan tool that covers the brands you expect to service and includes software updates, because almost every modern repair starts with a scan. The Autel MaxiSYS MS909S2 combines diagnostics with Topology 3.0 module mapping and integrated MaxiTPMS functions, while the MaxiSYS Ultra adds dynamic topology mapping and the MaxiFlash VCMI. If you plan to take on hybrid and EV work, the MaxiSYS MS909EV adds HV battery analysis. See our Autel diagnostic equipment page to compare models.

Should a new workshop offer car aircon servicing?

Yes, aircon servicing is worth planning for from the start, because it is a recurring job and needs dedicated equipment. Our K10HV fully automatic aircon recovery machine handles R134a as standard, with an R1234yf configuration available on request, and has no annual database subscription. Many newer cars use R1234yf, so ask us about the right configuration before you buy. For compressor failures and contaminated systems, the K11HV+ flushing machine adds refrigerant-based flushing.

How do you prepare technicians for hybrids and EVs?

Train them before the work arrives, because high-voltage systems need specific safety knowledge and procedures. The K-Tech Technical Training Academy runs an Intermediate Hybrid & EV Technology Training Programme with Temasek Polytechnic, aligned with IMI standards and eligible for SkillsFuture Credit. We also run ADAS calibration training with live-vehicle work. Details are on our training page.

Signs your workshop setup plan needs a rethink

  • You have signed a lease before confirming the approved use of the unit.
  • Your equipment budget has no line for software updates, calibration or training.
  • Your diagnostic tool does not cover the brands that dominate your area.
  • You have no plan for R1234yf vehicles or hybrid and EV safety.
  • No one on the team has been trained on the equipment you are buying.

How K-Tech helps new workshops

K-Tech Auto Solution supports new and expanding workshops across four areas:

  • Equipment: authorised Autel distribution, aircon recovery and flushing machines, battery, TPMS and tyre inspection tools, and EV equipment. Browse our workshop equipment.
  • Training: IMI-aligned hybrid, EV and ADAS calibration courses through our training academy.
  • Support: technical support and software updates for the tools we supply.
  • Setup: workshop setup consultancy to plan your equipment list, stages and layout around the jobs you want to sell.

K-Tech does not repair vehicles directly. Car owners who need servicing can visit the Motoserv network at Motoserv.sg.

Visit us: K-Tech Auto Solution, 60 Jalan Lam Huat #05-55, Carros Centre, Singapore 737869. Open Monday to Friday, 10am to 5pm.

Key takeaways

  • Confirm the unit’s approved use with URA (and JTC consent where relevant) before signing a lease or renovating.
  • Check licences and notifications on GoBusiness for the activities and substances you plan to handle.
  • Equip in stages: core tools, a professional scan tool and aircon first; electrical, TPMS, ADAS and EV equipment as you grow.
  • Budget for software updates, training and support, not just hardware.
  • Plan early for R1234yf aircon systems and hybrid and EV safety.

Frequently asked questions

Do I need approval for the premises before opening a car workshop in Singapore? Yes, the premises should be approved for industrial-related use. URA advises checking the approved use of a unit before committing to a tenancy or renovation, and JTC consent is needed for units on JTC land. Confirm requirements with URA and your landlord.

What licences does a car workshop in Singapore need? It depends on your activities and what you store on site. Search GoBusiness Licensing for your planned activities; for example, NEA licensing may apply to certain hazardous substances. Check with the agencies directly, as requirements change.

What is the most important equipment for a new car workshop? After lifts and core tools, a professional bidirectional diagnostic scan tool is the most important purchase, because most modern repairs start with a scan. An aircon recovery machine is a close second in Singapore’s climate.

Can K-Tech help plan my workshop equipment list? Yes. K-Tech Auto Solution offers workshop setup consultancy, helping you choose equipment and plan stages around the jobs you want to offer. Call or WhatsApp 6264 3832 to discuss your plans.

Is technician training for new workshops eligible for SkillsFuture? K-Tech’s Intermediate Hybrid & EV Technology Training Programme with Temasek Polytechnic is SkillsFuture Credit eligible, and our ADAS calibration training is SkillsFuture eligible. See the K-Tech training page for course details.

Plan your workshop with K-Tech

Starting a new workshop or planning next year’s equipment budget? Talk to our team about equipment, training and setup. Call or WhatsApp 6264 3832, email sales@k-tech.sg, or send an enquiry through our contact page.